Look Keo 2 Max Carbon Pedals

At a mere 122 grams (in Carbon Version, 130g in Composite), the Kéo 2 MAX is one of the lightest pedals in its category. This has been achieved through the use of a carbon injection process allowing for weight reduction and improved durability.
 
Particular attention was focused on reliability and provided through features such as: a carbon injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last.
The new line of Kéo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781).
Dual seals increase bearing longevity.
 
Thanks to 14mm of threads on the new LOOK axle, the Q-factor may be extended by 2mm with the use of specific washers available separately.
Use of these specific washers results in a Q-factor of 55mm versus the original 53mm.

• Warranty (years):
  2
• Pedal weight – pair (g):
  M
• Float range (&deg):
  8 or 12 adjustable spring
• Float:
  Float with friction
• Includes:
  KEO GREY CLEATS AND MOUNTING HARDWARE (6 BOLTS 5 X 11MM AND 6 WASHERS)
• Pedal engagement:
  Single-sided
• Pedal Type:
  Clipless
• Brand:
  Look